Owner's manual

15 WHEELS, TIRES
170
Finishing work
– Remove the rear of the motorcycle from the lifting gear.
( p. 110)
15.5 Checking the rear hub rubber dampers
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They
eventually wear out during operation. If the rubber dampers are not changed in time, the rear sprocket
carrier and the rear hub will be damaged.
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 108)
– Remove the rear wheel. ( p. 165)
E01132-10
Main work
–
Check bearing
1
.
» If the bearing is damaged or worn:
– Change the bearing.
–
Check the rubber dampers
2
of the rear hub for damage
and wear.
» If the rubber dampers of the rear hub are damaged or
worn:
– Change all rubber dampers in the rear hub.