Owner's manual

ELECTRICAL SYSTEM 16
191
Info
Insert catch
A
into recess
B
.
– Insert the screw and first turn counterclockwise until it
engages in the thread with a small jerk. Tighten the screw
lightly.
16.7 Checking the headlight setting
0
0
AA
0
0
BB
400726-10
– Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
– Position the vehicle perpendicular to the wall at a
distance
A
from the wall and switch on the low beam.
Guideline
Distance
A
5 m (16 ft)
– The rider now mounts the motorcycle with luggage and pas-
senger if applicable.
– Check the headlight setting.