Owner's manual
COOLING SYSTEM 17
207
E01115-11
–
Loosen bleeder screw
3
.
Guideline
3 turns
– Tilt the vehicle slightly to the right.
– Pour in coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant ( p. 246)
– Completely fill the radiator with coolant.
– Mount the radiator cap.
– Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and let it warm up.