Owner's manual

RIDING INSTRUCTIONS 10
95
– Accelerate only up to a speed suitable for the road surface
and weather conditions. Particularly in bends, do not shift,
and accelerate very carefully.
– Brake if necessary and close the throttle at the same time in
order to shift down.
– Pull the clutch lever and shift into a lower gear, release the
clutch lever slowly, and open the throttle or shift again.
– If the engine stalls (e.g. at a crossroads), just pull the clutch
lever and press the electric starter button. You do not have to
shift into neutral.
– If the malfunction indicator lamp lights up during a trip,
please contact an authorized Husqvarna Motorcycles work-
shop as soon as possible.
– If the general warning symbol begins to flash in the display
during the trip, several warnings have been detected.
Info
Warnings which have occurred are shown and saved
in the Info display until these are no longer active.