User's Manual

CONFIG MENU (continued)
6- AUX SENSORS
Press 6 on the Keypad to enter the Auxiliary
Sensors Submenu.
AUXILIARY SENSORS provide six temperature
inputs—analog or digital.
Analog for thermistors
Digital for thermostats.
ANALOG SETTING
A N A L O G accommodates temperature readings
between – 40 and + 120˚F. Set on
ANALOG, an
unused input will produce a – 40.
DIGITALSETTING
When set on
DIGITAL the read out will be either
OPEN (not in use) or CLOSED.
Use the key to toggle between ANALOG and
DIGITAL.
Using the ENT key, move down the selections.
Press CLR. Key in your selection and press ENT.
The cursor will move down to the next sensor.
Press ESC to return to AUXILIARY SENSORS MENU.
Press ESC again to return to SENSOR SETUP MENU.
Press ESC again to return to CONFIG MENU.
Note: Aux Sensors 7 through 12 are available
only on Expansion Module.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.) 970307
P/N 374511B
Page 14
PROTOCOL
™
Hand Held Device
AUX SENSOR #1
M O D E – D I G I TA L
NAME –
T E R M . S P – C L O S E D
HI ALARM – 0 F
LO ALARM – -40 F
A L A R M – E N A B L E D
SENSOR SETUP MENU
1-TEMP #4
2-TEMP #5
3-TEMP #6
4-TEMP #7
5-TEMP #8
6 - AUX SENSORS
AU X I L I A RY SENSORS
1-AUX SENSOR #1
2-AUX SENSOR #2
3-AUX SENSOR #3
4-AUX SENSOR #4
5-AUX SENSOR #5
6-AUX SENSOR #6
MORE ON NEXT PAGE
AU X I L I A RY SENSORS
1-AUX SENSOR #7
2-AUX SENSOR #8
3-AUX SENSOR #9
4-AUX SENSOR #10
5-AUX SENSOR #11
6-AUX SENSOR #12