User Guide

104893 10/05
2-1
This safety alert symbol is used to call attention to a
message intended to provide a reasonable degree of
PERSONAL SAFETY for operators and other persons
during the normal operation and servicing of this equipment.
DANGER – denotes immediate hazards which WILL
result in severe personal injury or death.
WARNING - denotes a hazard or unsafe practice which
COULD result in severe personal injury or death.
This manual uses two other words to highlight
information. IMPORTANT calls attention to special
mechanical information and NOTE: emphasizes general
information worthy of special attention.
All operators should read this manual, or be instructed
about safe operating and maintenance procedures. This is
the owner’s responsibility.
Improper use or maintenance by the operator or
owner can result in injury. To reduce the potential for
injury, comply with these safety instructions and always
pay attention to the safety alert ▲ symbol, which means
DANGER or WARNING - “personal safety
instructions.” Failure to comply with the instructions
may result in personal injury or death.
Incorrect usage of this machine may result in severe
injury. Personnel operating and maintain- ing it should
be trained in the proper use and should read the
manuals completely and thoroughly before attempting to
set-up, operate, adjust, or service this machine.
The Quick Reference Decals located on the unit are
designed to give the operator brief information needed in the
daily operation of the machine. These decals are not
intended to be used in place of this manual but instead are to
be used as an extension of this manual. These decals should
not be remove or obliterated. Replace these decals if they
become unreadable.
It is the owner’s responsibility to make certain that the
operator reads and understands this manual and the Quick
Reference Decal before operating this machine. It is also
the owner’s responsibility to make certain that the operator
is a qualified and physically able individual, properly
trained in the operation of this equipment. Local regulations
may restrict the age of the operator.
The owner should also ensure that the operator/mechanic
know that they are responsible for their own safety as well
as the safety of other persons within the vicinity.
Remember, the operator is responsible for accidents or
hazards occuring to other people or their property.
Safe Operating Practices
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
Operation
▲
Never leave a running machine unattended. Always
disengage deck clutch, engage park brake, place H-bar
steering in neutral, place cruise control lever in neutral
position, stop engine, and remove ignition key when
leaving the unit.
▲
If you lose steering control while operating the
machine, place the park brake lever in the park
brake position immediately. Inspect the machine
and involve your Hustler dealer to resolve the
problem before continuing to operate.
▲
Always keep safety shields and covers in place, except
for servicing.
▲
Always maintain a safe distance from people and pets
when mowing. Always stop machine if someone
enters the area.
▲
Always operate machine in daylight or with adequate
working lights.
▲
Follow daily and weekly checklists, making sure hoses
are tightly secured and bolts are tightened.
▲
Always observe traffic laws while driving machine
from one location to another. Watch for traffic when
operating near or crossing roadways.
▲
Always keep engine and machine clean, removing
accumulated dirt, trash and other material from
machine. Clean up oil or fuel spillage. Allow
machine to cool before storing.
▲
Inspect area to be mowed for hazards such as rocks,
metal objects and other debris which may be thrown or
entangled by mower blades. Remove these objects
before mowing.
▲
Always be alert for hazards such as rocks, metal
objects and other debris which may be thrown or
entangled by mower blades. Watch out for holes or
deep depressions.
▲ Always wear adequate ear protection, such as
earplugs, when operating this equipment as prolonged
exposure to uncomfortable or loud noises can cause
impairment or loss of hearing. Do not wear radios or
music headphones while operating the machinery.
Safe operation requires your full attention.
▲
Always inspect machine for damage after striking a
foreign object. If damage is found, repair machine
immediately. Be sure to disengage deck clutch, place
park brake lever in park brake position, stop tractor
engine, and remove ignition key when leaving
operator’s seat to inspect damage.
▲
Always be aware of what is behind the machine before
backing up.
▲
Never rotate forward suddenly on H-bar handle while
the machine is in rearward motion.
▲
When traveling in reverse, rotate handle forward
gently and avoid sudden movement. Rapid movement
SAFETY PRECAUTIONS