User Guide

regularly.
▲
Grass collection system components are subject to wear, damage and
deterioration, which could expose moving parts or allow objects to
be thrown. Frequently check components and replace with
manufacturer’s recommended parts, when necessary.
▲
If a BAC-VAC™ is mounted to the ATZ it will be necessary to
remove the BAC-VAC™ and front wheel weights from the tractor
and it will be necessary to re-attach the drive wheel weights, frame
weights and the front and rear mount legs to the tractor before
operating the unit on a slope.
▲
Use only genuine Hustler replacement parts to ensure that original
standards are maintained
Using a ramp
▲
Use extreme caution when loading and unloading a unit with a ramp.
▲
Use only a single, full width ramp; do not use individual ramps for
each side of the unit. Having a full width ramp provides a surface
for the tractor frame to contact if the unit starts to tip backwards. It
also reduces the risk of a wheel going off and the machine tipping
over.
▲
Do not exceed a 15 degree angle between the ramp and the ground
or between the ramp and the trailer or truck.
▲
When on a ramp avoid sudden acceleration
107906_0606
12-4