Use and Care Manual

604220 4-7 REV E
Seat Adjustment
The seat on the Hustler
®
Raptor™ mower can be adjusted
forward and rearward by pivoting the seat platform up and
forward. Then, loosen the four cap screws on the underneath
side of the seat platform. Position the seat where you have the
best control of the machine and are the most comfortable and
then tighten the cap screws.
WARNING
Mower blades are sharp and can cut. Wrap the blade(s) or
wear gloves and use extra caution when servicing them.
Figure 4-7
Figure 4-8
Figure 4-9
Resharpening
pattern
Do not sharpen to original pattern (below). It is
easier to get a straight cutting edge following
the resharpening pattern shown above.
Original edge
Warped Blade (Replace)
Straight Blade
Cutting
plane
Comparison of Warped and Straight Blades
Cutting edge
Twisted Blade Edge
(replace)
Cutting edgeCutting Plane
Straight Blade Edge
End view of blades, comparing
twisted and straightened blades
Figure 4-10
Figure 4-11
Boss
Spindle
shaft
face
Blade
Cap
screw