Operating Guide

REV C 3-8 607191

Anti-Scalp Wheels

Anti-scalp wheels are standard on these mowers. These

wheels are designed to minimize scalping when mowing on

rough uneven terrain. Figure 3-12

Anti-scalp wheels can be installed in two positions. With

the wheel installed in the bottom hole, the wheel is located

1.60” (40.6mm) below the mower blades. This setting is

preferred when mowing at cutting heights of 2-1/2” (63.5mm)

or higher.

When the wheel is mounted in the top hole, it is located .70”

(17.8mm) below the mower blades. This is the acceptable

setting for mowing at cutting heights of 1-1/2” (38.1mm) or

higher.

A. Anti-scalp wheel B. Adjusting holes

Figure 3-12