Operating Guide

607191 4-7 REV C

Seat Adjustment

The seat on these mowers can be adjusted forward and

rearward by pivoting the seat platform up and forward. Then,

loosen the four cap screws on the underneath side of the

seat platform. Position the seat where you have the best

control of the machine and are the most comfortable and

then tighten the cap screws. Figure 4-12

Steering Control Lever Adjustment

The steering control levers can be adjusted for operator

comfort.

A. To pivot the upper control levers forward or rearward,

loosen the cap screws that attach the upper control

lever to the lower lever. Then, pivot the upper control

lever. Tighten the cap screws. Figure 4-13

B. To lower and raise the control levers, remove the cap

screws. Slide the upper control lever up or down and

align the holes with the holes in the lower lever. Re-

install the cap screws and tighten.

The steering control levers should be adjusted so that they

align with each other when in the neutral position.

Rotate the blades after installation to ensure blade

tips do not touch each other or sides of the

mower.

A. Spindle shaft face

B. Boss

C. Blade

Figure 4-11

WARNING

A. Cap screws

Figure 4-12