Quickguide - HWAM® SmartControl™

4
8
3
Plug in the stove’s power supply within two minutes.
The room temperature sensor is now flashing green.
Then it lights up constantly, and when it turns o, the
sensor has been successfully paired with the stove.
The distance between the room temperature sensor and
the stove may be up to  to  meters.
If the pairing fails, please un-plug the power supply and
repeat the steps -*.
*Flashing green LED: The room temperature sensor is in pairing mode.
*Constant green or turned o LED: The room temperature sensor has been successfully
connected.
*Constant orange LED: The room temperature sensor is searching for the stove. Do nothing - it will
re-establish the connection itself.
*Constant red LED: The room temperature sensor is not connected to the stove.
Wi-Fi Direct / Local Network Wi-Fi 2.4 GHz
Enter the Wi-Fi settings on your mobile phone or tablet
and establish the connection to your stove using Wi-Fi
Direct (e.g., IHS STOVE_XXXX).
Open the IHS SmartControl™ App.
When the Wi-Fi symbol in the top right corner flashes
green, click on the symbol.
Follow the app’s instructions and connect your stove to
your local network.
Remember to have your network key at hand!
Initially, set the desired temperature level on Level  or 
(+ / - yellow level bar in the bottom of the app).
Temperature Level