User's Manual

To remove a logger from the list, select the logger, and click the

button.

Once the button is clicked, all the listed loggers’ sound data will

be downloaded. Please wait while it downloads all the data. Once completed, the

status should display “Complete” and the date should be the start date and time of

the logged data.

Clicking on the button will open a window, and the sound will be

played. To the right of the date parameter, clicking the up and down arrows will

navigate through the downloaded sound data. A graph showing the current sound

data will also be displayed.

Click on the button to correlate the sound files. The sound files

must be of the same time stamp for the correlation to work. Correlation is not

possible if *** is seen by the logger time.