User's Manual

3
Connecting to Loggers
Before being able to read from any logger, a connection must be made to either the
USB Wireless Transceiver unit or the Patroller unit. To do so, click on the icon.
The software only permits sound recording programming via the USB Wireless
Transceiver unit.
Plug the USB Transceiver unit, and select the “Patroller / USB Wireless” option from
the drop-down menu.
Clicking the button should automatically detect and connect to
the USB Transceiver, which is confirmed with the message
. If this does not, unplug and replug the transceiver.
First Patrol of the Loggers
Clicking on will open the Patrol window. If the local loggers’ data are not read
automatically, click on the button.
By default, the loggers’ reference numbers, locations, level and spread, and leak
detections are shown. The loggers’ location must be added manually.
Note: if the logger does not appear, try swiping the logger with a magnet along the
square ridge on the side of the case. Warning: Swiping the logger will invalidate
synchronisation for any sound recordings not yet downloaded.
More options and information from the loggers can be seen by clicking on File ->
Options, and selecting the information of interest.