User's Manual

11. Wireless connection function
Press the wireless connection button to turn on the wireless connection function; press the wireless connection button again
to turn off the function.
After the wireless connection function is turned on, the indicator light flashes. At this time, you can use mobile phones,
computers and other devices to search for "MIDI KeyBoard-01" and establish a connection. After the connection is
successful, the wireless connection indicator light is always on.
12. Pedal Interface (SUSTAIN)
When a pedal is connected, MIDI messages are sent when the pedal is operated.
Preset parameter editing
1. Modify custom knob parameters
In the MENU interface, turn the custom knob to be modified to jump to the setting interface of the corresponding knob, use
the [UP] and [DOWN] keys to select a parameter, and then use the selection knob to modify the parameter value.
The working mode of the knob can be modified:
◇ When the working mode of the knob is CC command:
① You can set the MIDI Channel for the knob to send MIDI.
② You can set the knob to send MIDI-controlled CC commands.
③ The maximum and minimum values of the CC instruction can be set.
◇ When the working mode of the knob is Aftertouch:
① You can set the MIDI Channel when the knob sends MIDI.
② You can set the maximum and minimum values of the knob to send Aftertouch.
③ Aftertouch can be set to Key Aftertouch or Channel Aftertouch.
◇ Modify pad parameters
In the MENU interface, hit the pad you selected to jump to the corresponding pad setting interface, use the [UP] and
[DOWN] keys to select parameters, and then use the selection knob to modify the parameter values.
The working mode of the pad can be selected:
◇ When the working mode of the pad is Note, hit the pad to send the key value MIDI code.
① You can set the MIDI Channel of the pad.
② You can set the key value of the pad.
③ You can set the velocity curve of the pad.
④ You can set the Aftertouch of the pad as Key Aftertouch or Channel Aftertouch.
◇ When the working mode of the pad is CC N, each time the pad is struck, a CC command is sent.
① The MIDI Channel of the CC command can be set.
② The CC value of the CC instruction can be set.
◇ When the working mode of the pad is CC Toggle, the value of Toggle on corresponding to the CC command is sent when
the pad is hit, and the value of Toggle off corresponding to the CC command is sent when the pad is hit again.
① The MIDI Channel of the CC command can be set.
② The CC value of the CC instruction can be set.
③ You can set the value of Toggle on and Toggle off.
◇ When the working mode of the pad is CC Momentary (CC M), when the pad is struck, the Pressed value corresponding to
the CC command will be sent instantly when the pad is pressed; the Released value corresponding to the CC command will
be sent when the pad is released.
① The MIDI Channel of the CC command can be set.
② The CC value of the CC instruction can be set.
③ You can set the value of Pressed and Released.
◇ When the pad working mode is Program Change:
① You can set the MIDI Channel of Program Change.
② The value of Program Change can be set.