Datasheet

Page 1 of 2 HY-LINE AG
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: [phone]
E-Mail: [e-mail]
● 11.1 V, 4.6 Ah
● High maximal discharge current
● Integrated Protection Circuit for:
o Over charge protection
o Over discharge protection
o Over discharge current protection
o Short circuit protection
o Temperature protection (charge& discharge)
Specification
General
Configuration
3S2P
Nominal voltage
11.1 V
Nominal capacity
4’600 mAh
Watt-hour rating
51.1 Wh
Standard charging
12.6 V, 3.22 A, 3 h, 25°C (Constant voltage,
constant current)
Standard discharging
4.6 A (Constant current, 3.0 V end)
Continuous allowable discharging current
<5 A
Cell
Type
Sanyo UR18650FK-2300mAh
Typical capacity
2300 mAh
Safety protection board
Cut off voltage
13.05 V
End of discharge voltage
7.2 V
Over discharge current detection
min.: 5.2 A max.: 8.25 A
Over discharge delay time
1000 ms
Environmental
Operating temperature range
Standard charging 0..45°C
Standard discharging -20..60°C
Quick discharging 0..40°C
Physical
Dimensions
71 x 55.5 x 37 mm
Weight
0.3 kg
Connection
2 wires 10 cm
Li-Ion Battery H2B181