If any problems, please contact our after-sales email: S/ a ~ ANS -Better Tools for Better
Product Technical Data If any problems, please contact our after-sales email: Technical data Current: 4A Rated voltage: 120V/60 Hz No load speed: ny = 4500 min-1 Max. cutting depth: 25 mm Protection class: II / (double insulation) Sound pressure level: Lara 90,07 dB (A) Uncertainty: KPA Keats dB Sound power level: Lys = 101,07 dB (A) Uncertainty: Kwa = 3 dBV Hand/arm vibration ah= 3.282 m/s? Uncertainty K = 1.
If any problems, please contact our after-sales email: 1. INTRODUCTION Please aka sure you familiarize yourself fully with the way the device works fora you use it for the first ima and that You understand how to handle satirical power tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a oafs place. If you pass the device on fo anyone SASE, pie ass ensure that alt alas pass on all the documentation 2.
If any problems, please contact our after-sales email: Diamond saw blade {d): + Description: @85mm x10mm non-segmented blade Suitable for: Ceramic, tle HSS saw blade (e): « Description: @85mm x10mm + Suitable for: Soft metal, aluminum Others: Glued fence (a) Dust extraction hose (b) Inner hexagon wrench (f} Naming: = This machine Isn't lusted for abrasive wheels «Avoid overheating the blade lips during using ~ This tool should sways be used with the dust hose connected and attached to a sultanas vacuum indu
If any problems, please contact our after-sales email: 3. Personal safety a. Stay alert, watch what you ars doing and Liz scamming sands when operating a power tool. Do not iss a power tool ‘while you ars tired or under the Influence of drugs, chocoholic or medication. A moment of Inattention whipsaw operating peer tools may result In serious personal Injury b. Usa personal protective equipment Always wear eye protection.
If any problems, please contact our after-sales email: .
If any problems, please contact our after-sales email: A damaged device, mains lead or pig presents a serious danger to (ifs from priceless shock Always have any repairs carried out or replacement parts fitted at the service center or by an electrical equipment repair specialist.
If any problems, please contact our after-sales email: Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use laundry handle, If provided, for maximum control! over kickback or torque reaction during start-up. The operator ‘can control marque reactions or kickback forces, if proper precautions are taken. b. Never place your hand near the rotating accessory. Accessory may kickback over your hand ©.
If any problems, please contact our after-sales email: 1.2 Releasing the plunge stop Press the rear position of safety lock button (5) downwards and keep It pressed (refer to the direction of arrow @ on Fig. 7} NOTE: Pressing the safety lock button (5) unlocks the plunge cut mechanism at the same time, 30 they the motor can bo moved downwards. The saw bide emerges from the removable protective cover (12). 2. Ratting the guide fence (Fig.
If any problems, please contact our after-sales email: d. Place the material to be cut onto a fiat surface such es a workbench, table or floor. Use apiece of scrap material underneath It: You do not wish to damage the work surface. The work surface Is Likely to damage the blade. Eg. a concrete floor Plug Into mains supply. Grasp the tool firefly (Ses “Holding & switching ON/OFF” section) and rest its metal base plats root the surface to ba cut.
If any problems, please contact our after-sales email: 13. CLEANING AND MAINTENANCE Regular cleaning is required for the safe operation of the too, a3 an excessive build up of dust will prevent the tool from ‘operating comely. The dust extraction hose (i) may block and require cleaning occasionally, especially if damp wood is being cut. 8). Unplug from mains supply. b).