User's Manual

10
How to install Hycore T1
Step 11
Flip your bike back to the
right position.
Step 12
Connect the brake cable
and check that the brake
is working properly.
 A disk rotor with a
diameter of 180㎜ and an
adapter is required.
 Make sure that there is
enough space between
Hycore T1 and the frame
to install caliper.
 Installation may not be
possible depending on the
type of bike.
Installation with Disc Brake
 Install Hycore T1 after
shifting down the rear
derailleur so that it is
outermost position.
 After installing, adjust
the gear step so that
the transmission and
pulley are straight.
Installation with Multi-gear