User guide

HMG 3010 Page 77
Edition 11/2011 - V04 R01 Part No.: 669855
• In the Data format line, enter the format of the
data value to be read. The following formats are
available:
- 8; 16; 24; 32-Bit Integer
- 8; 16; 24; 32-Bit Unsigned
- 32-Bit Real
• In Byte-series line, indicate the order
(significance) in which the databytes should
follow one another in the message.
• In the Lower data value and Upper data
value enter the data values which the
sensor delivers at the upper and lower
measuring range final value.
The specified data range is then scaled in
the measuring range.
• Back takes you back to the previous
screen.
Configure other CAN-messages in the
same way as described previously.
• If CAN-messages is selected, a list of all
read CAN-messages is displayed with
date stamp and contents.