User manual

2.1 | Description of the device (Fig.1)

Electrodes buttons

[ON/SET+] button

[OFF/SET-] button

Battery compartment

Electrode pad

Program name

2.2 | Key functions

[ON/SET+] Button = Turn on the device,

device is in wait status (Diode glows

permanent); in work status you increase

intensity.

Press again the [ON/SET+] Button = the

device is in work status in the selected

Programm in level 1 (diode ashes);

Press again to increase the output intensity (to max. level 10).

[OFF/SET-] Button in wait status = Press the button to select the program;

device is in work status = decrease intensity and turn o the device.

During operation, each press decreases the intensity by one level.

Press the button for 2 seconds to turn o the device.

2.3 | Technical information

Body material: ABS

Channel: Single channel

Power supply: 2x AAA alkaline batteries

Wave shape: Biphase square-wave pulse

Pulse duration: 200 - 250 uS

Pulse frequency: 1- 80 Hz

Output voltage: max. 35 Vpp ± 20% at 500 Ohm load

Treatment time: 30 minutes

Intensity: Adjustable from 0 to 10

Size of electrode pad: 53 x 73 mm

3 4

Fig. 1