User manual

g Starting the treatment

Press [ON/SET+] button to adjust the output intensity. The unit switches

into »work status«. If the electrode pad is not placed rmly to the skin

the device returns after 2 seconds into »wait status«.

h Adjust the output intensity

Press [ON/SET+] button to increase the output intensity (adjustable from

0 to 10). Press [OFF/SET-] button to decrease the intensity. The device

will return to the »wait status« when the intensity is 0.

i Turn o the device

Press the [OFF/SET- ] button for 2 seconds to turn o the device at any

mode.

Batteries: To replace the batteries, open the battery cover and remove the

batteries. Replace them with two new AAA alkaline batteries.

3.1 | Possible areas for treatment

Where to attach self-adhesive electrode pad?

Each person reacts dierently to electric nerve stimulation. Therefore the

placement of the electrode diers individually. If application is not success-

full, contact your physician to nd out which placement techniques are best

for you. The size of adhesive pad may not be changed, e.g. by clipping o

parts of them.

Note the following, when placing the electrodes for the treatment:

• If you want to activate the surface muscles, attach the adhesive electrode

parallel to the bres.

• To reach the deep muscle layers, place the adhesive pad diagonal to the

muscle bres.

Symptoms Program Possible areas for treatment

Cervical vertebrae pain

B, F

Scapulohumeral periarthritis