User manual

3 | Description of the device

Neck/Back Heat Pad

Connecting cable

Pocket for battery compartment

Closure magnets

Controller and Lithium Ion rechargeable battery

Light Emitting Diodes (LEDs)

[Start/Stop] button

Charger

3.1 | Main features of this device

• Extra–soft plush synthetic

• Appealing design

• The added warmth in the cervical area can help to ease tension

• It has 4 levels of heat

3.2 | Technical data

Model: LH-1153

Mains adaptor: 100-240 V, 50 Hz/60 Hz, 8,4 V

Input voltage: 8,4 V

Power: 10 Watt

Material: 100 % Polyester

Weight: 220 g

Dimensions: 34 x 19 x 1,5 cm

4 | Operating instructions

• If it is used for another purpose or operated incorrectly, no liability for possible damages can be accepted.

• If this device is stored near freezing, allow it to acclimate to room temperature before use.

a Please charge the battery fully before using the device for the rst time. To accomplish this, plug the charger

into a power mains and connect with the controller/battery and allow charging for 3-4 hours. The extent of the

charge is indicated by a red LED on the controller. The indicator light will turn green once charge is complete.

Afterwards: Remove charger.

b Connect the cable of the warming cushion with the controller.

The device is now ready to be used.

c Depress the [Start/Stop]-button for 2 seconds.

Select the desired level of warmth by pressing the [Start/Stop]-button repeatedly. Green is the lowest and red

is the highest setting.

d Place the controller in the side pocket during use.

e The neckpillow is then placed in the neck/shoulder region. Take care to place the battery pack pocket on the

outside, away from the body.

The 3 magnets found in the carriers serve as closures. Since one carrier contains two magnets the user can

chose a tighter or looser t.

f To turn o the cushion, depress and hold the [Start/Stop]-button for 2 seconds. The LED which indicated the

level of warmth will turn o.

A red blinking LED light, shows a charge is required.

4.1 | Uses

• The product is supplied with power by two Lithium Ion rechargeable batteries which are integrated in the device’s

controller.

• The degree of warmth can be selected in 4 levels between 38 and 55 degrees Centigrade.

• User is free to choose the time of use. It is only limited by the life of the rechargeable battery.