Owner's manual

MODEL S2C
2” (50 mm) Discharge
2” ‘Mini-Sub’
HYDRAULIC SUBMERSIBLE
UTILITY PUMP
The S2C Mini-Sub is our most versatile, all
purpose, utility pump. As part of the Mini-Sub
System that includes our HT3G ‘Ultra-Lite’
Power Unit, this pump offers the best
combination of light weight and portability of
any self-contained submersible pump system
on the market today.
FEATURES
•
Lightweight (Only 12 lbs.) for Easy
Handling
•
Rugged and Reliable gear motor
•
Variable Speed hydraulic drive
•
Small Size allows this pump to fit into
10” openings
•
Internal By-pass Valve assures Correct
Rotation
•
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
•
Operates with our HT3G ‘Ultra-Lite’ power
unit or other hydraulic power sources
capable of flows to 1.5 GPM
B0109
167 Stock Street, Nesquehoning, PA 18240 Phone: [phone] Fax: [phone]
Website
: www.hydra-tech.com E-Mail: [e-mail]
WEIGHT:.............................................. 12 lbs. (5.4 kg)
HEIGHT:................................................ 9 3/4" (25 cm)
WIDTH (@ widest point):...................... 9 3/8" (24 cm)
DISCHARGE:............................................... 2" NPT(F)
SOLIDS HANDLING:................................. 1/4" (6 mm)
HOSE PORTS:........................................ 3/8" (-6) SAE
PUMP BODY:.................................... 365T6 Aluminum
IMPELLER:................................................ Ductile Iron
WEAR PLATE:................................................... Delrin
SHAFT:.................................. Heat Treated Alloy Steel
ELASTOMERS:....................................... Buna N (Std)
HYDRAULIC OIL:....... 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:........................ Max. 1.5 GPM (6 LPM)
OPERATING PRESSURE:
Cont.Max: 2000 PSI (136 Bar)
Int. Max: 2500 PSI (172 Bar)
POWER SOURCE:... Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice