User Manual

MODEL S2T-2 (Ductile Iron Body)
MODEL S2TAL-2 (Aluminum Body)
2” (50mm) Discharge
2” HYDRAULIC SUBMERSIBLE
TRASH PUMP
The S2T-2 is a Very Portable Vortex
Impeller pump. This pump can handle
stringy solids and can be used for jobs
such as bilge pumping, jobsite
dewatering, wastewater transfer, oil
skimmers, vault pumping and grit
chamber clean-outs.
FEATURES
•
Fully Recessed Vortex Impeller
(will Pass 1 1/2" [38mm] Semi-Solids)
•
Rugged and Reliable gerotor motor
•
Variable Speed hydraulic drive
•
Small Overall Size makes this pump very
versatile
•
Can be bolted directly into a pipeline
•
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
•
Operates with our HT6 and HT7 power
units or other hydraulic power sources
capable of flows to 5 GPM
D0109
167 Stock Street, Nesquehoning, PA 18240 Phone: [phone] Fax: [phone]
Website
: www.hydra-tech.com E-Mail: [e-mail]
WEIGHT: S2T-2........................................... 25 lbs. (11 kg)
S2TAL-2...................................... 17 lbs. (7.7 kg)
HEIGHT:............................................................. 13" (33 cm)
WIDTH (@ widest point):.............................. 9 3/8" (24 cm)
DISCHARGE:....................................................... 2" NPT(F)
INLET FLANGE:................................................ 1 1/2" 125#
SOLIDS HANDLING:..................................... 1 1/2" (38mm)
HOSE PORTS:................................... 3/8" SAE (-6) 'O' Ring
PUMP BODY: S2T-2........................................ Ductile Iron
S2TAL-2...................................... Aluminum
IMPELLER:......................................................... Ductile Iron
SHAFT:........................................... Heat Treated Steel Alloy
SHAFT SEAL:.................................... Carbon/Ceramic (Std)
ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:.................................. Max. 5 GPM (19 LPM)
OPERATING PRESSURE:.... Cont. Max: 2000PSI (136 Bar)
Int. Max: 2500 PSI (172 Bar)
POWER SOURCE:....... Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice