Installation Guide
© Hydrawise 2014 HWCBI006A
Link your controller to your account
You must link your Hydrawise controller to your account before it will start watering.
3. In the Hydrawise App or web browser, go to your Dashboard. Click on the Settings
icon on the blue ‘Watering Schedule’ bar and then click the Link to controller
menu item (see below).
!
4. Enter the serial number of your controller. The serial number can be found on the
rear of the unit or on the Controller Status screen in the Hydrawise unit.
You have now successfully finished installation.
Troubleshooting
Controller does not connect to wireless
• Refer to the error message on the controller screen for the reason.
• Check that your controller is in range of your wireless.
• Check that your security type matches your wireless router’s security type. Try
changing the security type on the controller and on your wireless to a different value.
• Check that your wireless router is configured to support 802.11b/g wireless clients.