Warranty

ManualsBrandsHydro Crunch ManualsGarden Center315-Watt CMH Ceramic Metal Halide Grow Light System with 6 in. Large Air Cooled Reflector

Instruction Manual

The H.I.D Electric Ballasts 315-Watt CMH

Features: Soft Start Technology ensures that lamp start-up is as lamp friendly as possible while maintaining

consistent ignition. Randomized firing sequencing allows large ballast installations to be turned on simultaneously

without taxing circuit breakers or switches.

Specifications:

Power Factor: 98%

Crest Factor: 1.7%

Total Harmonic Distortion (THD) < 10%

Operating Temperature: -30°C (-22°F) to 55°C (131°F)

Output Frequency: 110Hz

Input Voltage Range 100-265 VAC

Strikes for 315w CMH/CDM lamps

Generator Ready

50 Hertz to 60 Hertz operation allows for 315w bulb

brand and type

Voltage range

[V]

100-265 Vac

Starting time

[S]

5 Max

Pulse voltage

[KV]

4-6

Frequency

[HZ]

50/60

Input power factor

[ cosΦ]

≥0.98

THD

[ %]

≤10

Rated frequency

[Hz]

110

Amperage

AMP

240V/1.46Amp

120V/2.9Amp

Summary of content (6 pages)

PAGE 1
Instruction Manual The H.I.D Electric Ballasts 315-Watt CMH Features: Soft Start Technology ensures that lamp start-up is as lamp friendly as possible while maintaining consistent ignition. Randomized firing sequencing allows large ballast installations to be turned on simultaneously without taxing circuit breakers or switches. Specifications: Power Factor: 98% Input Voltage Range 100-265 VAC Crest Factor: 1.
PAGE 2
IMPORTANT PRODUCT INFORMATION READ IMMEDIATELY SAFETY FIRST! Failure to observe the following safety warnings may result in serious injury or death. Use all Hydro Crunch™ products only as directed. Failure to observe these safety warnings will result in a waiver of any and all liability on the part of Hydro Crunch™ its manufacturer, and resellers, and will void all warranties to the extent permitted by law. WARNINGS AND INSTRUCTIONS FOR USE:  Disconnect power before re-lamping.
PAGE 3
Daisy Chainable Feature: 120V Power Input: DO NOT EXCEED 4 UNITS Power Source 1 2 3 Max 4 240V Power Input: DO NOT EXCEED 8 UNITS Power Source 120-240v adaptor 1 NOTE: 277V Operation- DO NOT DAISY CHAIN 2 3 Max 8
PAGE 4
Operating Instructions: 1. Make sure the power supply cord and lamp end are properly connected. 2. Ensure the bulb is properly seated in the socket assembly. It should be tight, but not stressed. 3. Always use a bulb centric to the highest output of the ballast (e.g. 315w bulb/315w ballast) 4. Confirm the ballast is not near any source of moisture or standing water. 5. Check the sealed bearing fan to confirm it is free from any obstruction.
PAGE 5
2 Year Limited Warranty Service If the product will not work after you have read the troubleshooting guide and practiced the troubleshooting options, you are advised to return the Hydro Crunch™ light system to the retailer you purchased it from. The dealer will be able to examine the light and test its components. If they are not able to repair the light, they will return it to us for examination and repair/replacement. Do not attempt to repair any product on your own, as serious injury or death may result.
PAGE 6
IMPORTANT! The following pages contain important safety and operating instructions. Please read and follow all instruction in this manual. Carefully read and review all safety instructions, warnings and cautions contained in this manual. Failure to read and follow these instructions, warnings and cautionary statements may result in severe injury or death to persons and pets or damage to personal property.