Full Product Manual

Heating and Cooling
Thermostat User Manual
INSTRUCTIONS:
Thermostats are widely applied to aquariums, reptile markets, incubators, green houses and
refrigerators, where constant temperature controlling is required (heating and cooling).
MAIN FEATURES:
1. LED display, friendly interface, easy to read, operates and set the parameters.
2. Can choose COOL or HEAT mode.
3. Can switch between °C and °F
MAIN FUNCTIONS AND PARAMETERS:
◆ Temperature controlling range:16~40°C ◆ Temperature measuring range: -40~100°C
◆ Resolution: 0.1°C; Accuracy: ± 1.0°C ◆ Input: 1 NTC sensor
◆ Relay: 10A/220V ◆ Product consumption: ≤ 3W
◆ Input voltage: 110Vac± 15%
◆ Ambient Requirements: Temperature: -10~60°C; Humidity: 20%~85%°C
◆ Control load:≤ 550W/110V
KEYS:
KEY
ACTION
RESULT
STATUS
H/C
single press
switch between HEAT and COOL mode
In normal work status
SET
single press
enter into setting mode of DIFF and DELAY
In normal work status
single press
save and exit
In setting status
press 5 sec.
switch between °C and °F mode
In normal work status
UP
single press
enter into setting mode of stop temperature
In normal work status
UP
single press
upward adjust the parameter value
In setting status
DOWN
single press
downward adjust the parameter value
In setting status
DOWN
single press
enter into setting mode of stop temperature
In normal work status
ICONS:
ICON
MEANING
STATUS
Display
Not display
Flash
SNOW
cool working
cool not working
/
In normal work status
SUN
heat working
heat not working
/
In normal work status
COOL
cool mode
non cool mode
/
In normal work status
HEAT
heat mode
non heat mode
/
In normal work status
DIFF
/
/
DIFF adjustable
In setting status
DELAY
/
/
DELAY adjustable
In setting status