8 9 3 7 4 10 11 *kit does not include a faucet 6 5
This kit allows you to add a pressurized holding tank as wells as a post remineraliztion filter to your stealth RO100 or stealth RO200 for the purpose of drinking water. This can be connected to an above the sink faucet. This kit comes with one length of tubing, be sure to cut tubing with a sharp knife or optional tubing snips (HL#24005). 1) Screw on tank valve. The threads on take have teflon tape on them to prevent leaks. 2) Insert 1/4” blue tubing. 3) Insert 1/4” tee to opposite end of tubing.
5) Insert check valve (be sure arrow points towards tank). 5 8) Cut blue 1/4” product water line coming from stealth (tubing snips optional) 8 6) Attach tubing to faucet (optional). 6 9) Insert tubing into other side of 1/4” tee. 9 7) Attach tubing to second 1/4” tee for filling resevoir or storage tank (optional).
10) Insert black 1/4”drain line into drain saddle. 10 11) Drill 1/4” hole into under sink drain pipe & attach drain saddle. Be sure to fill & flush tank 2 times before drinking the product water. 11 888-426-5644 www.hydrologicsystems.com info@hydrologicsystems.com Useful Video Links Basic Setup for a stealth RO Drinking Water Upgrade Kit: http://youtu.