Technical Specifications

Ashley 6731 | Air A12 Massage Series
Product Number: ASA12J6731CDFS-A 67” x 31” x 23”
TECHNICAL SPECIFICATIONS
Center drain.
Pump Location(s): Standard access
ELECTRICAL REQUIREMENTS
( 1 ) 115v 20AMP GFCI Circuits
STANDARD & OPTIONAL ACCESSORIES
JETS: 12 Total
❍ 12 Classic Air Jets
PUMPS
❖
1.0 Air Power 3-speed heated Air Pump
Quiet Pad Anti-Vibration Mounted Pump
CONTROLS
Air Switch On/O Control(s)
PURITY
HydroCleanse
FAUCET INFORMATION
• Deck mount or Floor mount (not included)
• Floor mount verify spout distance
• Access panel required for Deck mount
Specifications and features are subject to change without notice and are + .25”. All final measurements should be taken from tub on site.
HydroMassage Products LLC • 303-341-1845 • Fax: [phone] • www.hydromassageproducts.com
3” Lip width
17”
31-1/4”
43”
67”
53”
23”
18”
18-1/2”
105°
105°
16”
STANDARD ACCESSORIES
EZ Level Base • FDA Recipe Non-Toxic Food & Beverage Grade
Plumbing (primarily) • 30 Point Quality Assurance Factory Test
DRAINS & OVERFLOWS INFORMATION
• Overflow: Integral Linear: Included- Polished Chrome or
Brushed Nickel.
Optional - White.
• Bath Drain: Pop up: Included- Polished Chrome or
Brushed Nickel.
Optional - White, Biscuit, Black, Polished Nickel,
Oil Rubbed Bronze.
• In Floor Drain EZ Fast Connect (optional)
❖

Equipment
Access Panel
FS
ADDITIONAL INFORMATION
6" or more space required to access equipment panel. Tub may
also need to be shifted or disconnected in some situations.
Access panel equipment design and location may vary based
on model.
Your licensed installer must water test and run all equipment
before leaving your home to ensure proper operation and
validate warranty.