Technical Specifications

Ashley 6030 | Heated Soak Series
Product Number: ASSS6030CDFS-A 60” x 30” x 23”
TECHNICAL SPECIFICATIONS
Center drain.
Pump Location(s): Standard access
ELECTRICAL REQUIREMENTS
( 1 ) 115v 20AMP GFCI Circuits
STANDARD & OPTIONAL ACCESSORIES
CIRCULATION PORTS
1 Inlet
1 Outlet
PUMPS
❖
Whisper Flo Heat Pump
Quiet Pad Anti-Vibration Mounted Pump
CONTROLS
Air Switch On/O Control(s) for Heat Pump
PURITY
HydroCleanse
Specifications and features are subject to change without notice and are + .25”. All final measurements should be taken from tub on site.
HydroMassage Products LLC • 303-341-1845 • Fax: [phone] • www.hydromassageproducts.com
3-1/4” Lip width
18”
29-1/4”
37”
59-3/4”
49”
17-3/4”
23”
105°
105°
15-1/2”
STANDARD ACCESSORIES
EZ Clean Cast Acrylic • FDA Recipe Non-Toxic Food & Beverage
Grade Plumbing (primarily) • 30 Point Quality Assurance
Factory Test • EZ Level Adjustable Legs
DRAINS & OVERFLOWS INFORMATION
• Overflow: Integral Linear: Included- Polished Chrome or
Brushed Nickel.
Optional - White.
• Bath Drain: Pop up: Included- Polished Chrome or
Brushed Nickel.
Optional - White, Biscuit, Black, Polished Nickel,
Oil Rubbed Bronze.
• In Floor Drain EZ Fast Connect (optional)
❖
Equipment
Access Panel
FS
FAUCET INFORMATION
• Deck mount or Floor mount (not included)
• Floor mount verify spout distance
• Access panel required for Deck mount
ADDITIONAL INFORMATION
6" or more space required to access equipment panel. Tub may
also need to be shifted or disconnected in some situations.
Access panel equipment design and location may vary based
on model.
Your licensed installer must water test and run all equipment
before leaving your home to ensure proper operation and
validate warranty.