Technical Specifications

Catalina 6030SD | Air A12 Massage Series
Product Number: CAA12J6030SDFS-A 60" x 30" x 25"
TECHNICAL SPECIFICATIONS
Side drain
Pump Location(s): Standard #1 or LR #2
– right or left side access
ELECTRICAL REQUIREMENTS
( 1 ) 115v 20AMP GFCI Circuits
STANDARD & OPTIONAL ACCESSORIES
JETS: 12 Total
❍ 12 Classic Air Jets
PUMPS
❖
1.0 Air Power 3-speed heated Air Pump
Quiet Pad Anti-Vibration Mounted Pump
CONTROLS
Air Switch On/O Control(s)
PURITY
HydroCleanse
FAUCET INFORMATION
• Deck Mount or Floor mount (not included)
• Access Panel required for Deck faucet (optional)
• Floor mount verify spout distance
Specifications and features are subject to change without notice and are + .25”. All final measurements should be taken from tub on site.
HydroMassage Products LLC • 303-341-1845 • Fax: [phone] • www.hydromassageproducts.com
60”
3”
3”
29-1/4”
4-1/4”
3”
36-1/2”
17”
15-1/4”
7-1/2”
3/4”
3/4”
❖
#1 STD
#2 LR
25”
18”
1.75”
Back slope
120°
16-1/2”
Back slope
120°
STANDARD ACCESSORIES
EZ Level Base • FDA Recipe Non-Toxic Food & Beverage Grade
Plumbing (primarily) • 30 Point Quality Assurance Factory Test
❖
Equipment
Access Panel
FS
DRAINS & OVERFLOWS INFORMATION
• Overflow: Integral Round: Included- Polished Chrome or
Brushed Nickel.
Optional - White, Biscuit, Black, Polished Nickel,
Oil Rubbed Bronze.
• Bath Drain: Pop up: Included- Polished Chrome or
Brushed Nickel.
Optional - White, Biscuit, Black, Polished Nickel,
Oil Rubbed Bronze.
• In Floor Drain EZ Fast Connect (optional)
●
Faucet
Access Panel
ADDITIONAL INFORMATION
3" or more space required to access equipment panel. Tub may also
need to be shifted or disconnected in some situations.
Access panel equipment design and location may vary based
on model.
Your licensed installer must water test and run all equipment before
leaving your home to ensure proper operation and validate warranty.