Installation Instructions

21
Hydro Massage Products LLC • 303-341-1845 | FAX: [phone] • www.hydromassageproducts.com • [e-mail]
OPERATING INSTRUCTIONS
For Silver Combination Systems
NOTE: Do not start pump until all jets are submerged; water level should be 3" above highest jet.
ON/OFF AIR BUTTON PUMP CONTROL: Press the button once
and the pump will turn on. Press the button again and the pump will
turn off.
ON/OFF AIR BUTTON BLOWER CONTROL: Your bath is equipped
with a pneumatic On/Off Button that allows the user to turn the
blower On and Off and controls the blower’s intensity. A timer will
automatically turn off the blower after 20 Minutes if it is not stopped
manually.
To start a bath with a pneumatic On/Off Button, simply depress the
On/ Off Button and the blower will turn on.
Blower Speed: Once the blower is on, depressing the button again
will decrease the air output to medium speed, depressing the button
again will decrease the air output to low speed, depressing the
button again will start the Wave mode and a nal depression of the
button will turn off the blower.
Automatic Purge Cycle: Fifteen minutes after the blower is stopped
and the bath is drained the blower will automatically start for two (2)
minutes to purge and dry the air system channels or plumbing.
MICROFLOW AND ULTRA FLOW JET PRESSURE
ADJUSTMENT: Turning the jet face clockwise will reduce the
pressure up to 95% off.
MOOD LIGHT ON/OFF AIR BUTTON: Press the button once and
light turns on. Press the button again and the light turns off.
BULB REPLACEMENT: See page 26 for bulb replacement and lens
instructions.
HYDROCLEAN SANITATION SYSTEM: See page 25 for operating instructions.
Outer Ring-Turn On & OFF