Installation Instructions

Hydro Massage Products LLC • 303-341-1845 | FAX: [phone] • www.hydromassageproducts.com • [e-mail]
18
Outer Ring-Turn On & OFF
OPERATING INSTRUCTIONS
For Hydro Platinum Series
NOTE: Do not start pump until all jets are submerged water level should be 3" above highest jet.
DUAL ON/OFF AIR BUTTON CONTROL:
Operates each pump/jet action independently. Press the button once
and the pump will turn on. Press the button again and the pump will
turn off.
THREE SPEED PUMP CONTROL:
To operate the 3 speed control, turn the dial to change the speed.
H(High) to M(Medium) to L (Low)
NECK MASSAGE PILLOW:
Turning the dial counter-clockwise will open the Neck Massage Pillow
pressure to 100%. Turning the dial clock wise will reduce the pressure
down to 5%.
NOTE: Before operating the Neck Massage Pillow, make sure the
Lycra pillow cover is covering the grey pillow and the pillow is seated
securely in the grommets.
CHROMATHERAPY ON/OFF AIR BUTTON (Gold Series):
Press the button once and light turns on. Press the button again and
the light turns off.
BULB REPLACEMENT:
See page 26 for bulb replacement and lens instructions.
MICROFLOW, ULTRA FLOW, AND SOUL SOOTHER JET
PRESSURE ADJUSTMENT:
Turning the jet face clockwise will reduce the pressure up to 95% off.
HYDROCLEAN SANITATION SYSTEM: See page 25 for
operating instructions.
INLINE MAINTENANCE HEATER CONTROL: See page 25 for
operating instructions.
Neck Massage Pillow
with Cover