Installation Instructions

Hydro Massage Products LLC • 303-341-1845 | FAX: [phone] • www.hydromassageproducts.com • [e-mail]
28
USER MAINTENANCE INSTRUCTIONS
CONTINUED
SURFACE CLEANING
Use common, household NON ABRASIVE cleaners for most cleaning jobs. Rinse well and dry with
clean cloth. Never use abrasives such as scouring compounds, scouring pads, steel wools or harsh
chemicals. Rubbing Alcohol will remove most stubborn buildup and even some scuff marks. Do not
allow your acrylic surface to come into contact with products such as acetone (nail polish remover), nail
polish, dry cleaning solutions, lacquer thinners, gasoline, pine oil, etc. Remove dust with a wet sponge,
and dry with a soft, dry cloth. Paint splashes with a quick wipe of mineral spirits followed by a rinse with
water. Regular use of a quality automotive wax will maintain the sparkling nish of your tub. NOTE: Your
tub will become extremely slick after wax is applied!
SURFACE SCRATCH REMOVAL
Minor scratches may be removed by polishing tub with a NON ABRASIVE car polish and then buff out.
For deeper scratches we recommend contacting a bathtub repair or renishing company.
WALK-IN BATHS
It is especially IMPORTANT to wipe down the door seal and door jamb after each use in order to
maintain the integrity of the water seal. In order to keep the door seal and door jamb clean and not
accumulate dirt or debris of any kind, clean seal and jamb with a mild detergent and warm water using a
soft cloth. The door is to remain open and unlatched when not in use.