Technical Specifications

Savannah 7236 | H9 Water Massage Series
Product Number: SAH9J7236FS-A 72" x 36" x 25"
TECHNICAL SPECIFICATIONS
End drain.
Pump Location(s): Standard: #1 RR
ELECTRICAL REQUIREMENTS
( 1 ) 115v 20AMP GFCI Circuits
STANDARD & OPTIONAL ACCESSORIES
JETS: 9 Total
X 4 Micro Flow Water Jets
X 5 Ultra Flow Water Jets
PUMPS
❖
2.25 Hydropower 1- speed Pump
Quiet Pad Anti-Vibration Mounted Pumps
CONTROLS
Air Switch On/O Control(s)
PURITY
Hydro Clean Water Purity System • HydroCleanse
FAUCET INFORMATION
• Deck Mount or Floor mount (not included)
• Access Panel required for Deck faucet (optional)
• Floor mount verify spout distance
Specifications and features are subject to change without notice and are + .25”. All final measurements should be taken from tub on site.
HydroMassage Products LLC • 303-341-1845 • Fax: [phone] • www.hydromassageproducts.com
35.50"
1.50"
25"
9.50"
19.75"
19.25"
72"
48"
22"
120°
17"
❖
#1 RR
STANDARD ACCESSORIES
Deluxe Cushion Pillow • EZ Level Base • FDA Recipe Non-Toxic
Food & Beverage Grade Plumbing (primarily) • 30 Point Quality
Assurance Factory Test
DRAINS & OVERFLOWS INFORMATION
• Overflow: Integral Round or Linear: Included Polished Chrome
Optional: White, Biscuit, Black, Brushed Nickel, Polished
Nickel, Oil Rubbed Bronze
• Bath Drain: Pop up: Included Polished Chrome
Optional: White, Biscuit, Black, Brushed Nickel,
Polished Nickel, Oil Rubbed Bronze
• In Floor Drain EZ Fast Connect (optional)
❖
Equipment
Access Panel
FS
●
Faucet
Access Panel