Installation Instructions

34
Set Temperature
TEMPERATURE SETTINGS
TEMPERATURE TABLE OF CONTROLLER
Operaon
Screen on the controller
Built-in controller
1.
Remote controller
2.
Turn on the 120 VAC power supply to the unit.
3.
Press the "ON/OFF" buon on the controller in order to
turn the controller on.
4.
When ON, the STAND BY LED is lit.
5.
It shows the set temperature on its display as shown in
the picture on the right. (EX.: 120 °F)
Press the "HOT" buon or the "COLD" buon to set the
temperature seng of the unit.
Increasing temperature from 120 °F (50 °C) to 125 °F (52 °C) :
Increasing temperature above 140 °F (60 °C)
1. The micro boiler must be in Stand By to increase the
temperature.
2. Press the "HOT" buon to set 120 °F (50 °C).
3. Press and hold the "INFO" buon and the "HOT"
buon for a
t least 3 seconds. The remote will emit a
beep and change to 125 °F (52 °C).
4. Press the "HOT" buon to set up to 140 °F (60 °C).
(EX.: 120 °F)
1. The micro boiler must be in Stand By to increase the
temperature.
2. Press the "HOT" buon to set 140 °F (60 °C).
3. Press and hold the "INFO" buon and the "HOT"
buon for at least 3 seconds. The remote will emit a
beep and change to 145 °F (63 °C).
4. Press the "HOT" buon to set up to 160 °F (70 °C).
155 160
°C
°F 100 105 110 115 120* 125 130 135 140 145 150
38 40 43 45 50* 52 55 57 60 63 65 68 70
*Factory seng (Default): 120 °F
165 175
75 80
185
85