Installation Instructions

35
ADDITIONAL FEATURES
Information mode
You can get some information about the micro boiler condition by pressing “Info” button. For more
information, follow the procedures below:
Unit Conversion Mode
The remote controller has a function that can change units of temperature and ow rate from °F to
°C and from gallon per minute to liter per minute and vice versa, please follow the procedure below.
When the micro boiler is connected with the remote controller, the temperature
controller will not operate temperate settings, as only work for the information
mode.
Opera
Screen on the controller
1.
Temperature controller Remote controller
2.
First of all, inlet water temperature will be displayed
on the controller by pressing the "INFO" bu
on.
3.
Outlet water temperature will be displayed on the
controller by pressing the "INFO" bu
on.
4.
Press the "INFO" bu on to finish informa mode.
And then, water flow will be displayed on the
controller by pressing the "INFO" bu
on.
Inlet water temperature
(EX.: 60 °F)
Water flow
Outlet water temperature
(EX.: 120 °F)
(EX.: 3.5 GPM)
Operaon
Screen on the controller
Built-in controller
1.
Remote controller
2.
Press the "ON/OFF" buon on the controller in
order to turn the controller on.
3.
When ON, the orange LED is lit.
4.
The previous set temperature will be displayed on
the screen.
5.
Press the "INFO" buons for at least 3 seconds.
The set temperature should now be displayed in the
alternate unit of measurement.
(EX.: 100 °F)
(EX.: 38 °C)