Installation Guide

warranty does not include any other items no manufactured by HYDRO SYSTEMS, INC. HYDRO
SYSTEMS, INC. does not assume liability for the finish or the wearing quality of any plated product. No
dealer or other person has any authority to make any warranties or representations concerning HYDRO
SYSTEMS, INC. or its products. Accordingly, HYDRO SYSTEMS, INC. is not responsible for any such
warranties or representations. THERE ARE NO WARRANTIES BEYOND THE DESCRIPTION ON THE
FACE HEREOF. NO WARRANTY OF MECHANTABILITY, FITNESS, NOR OTHER WARRANTY
(WHETHER EXPRESS, IMPLIED OR STATUTORY) IS MADE BY HYDRO SYSTEMS, INC., EXCEPT
THAT IT WARRANTS THE GOODS TO BE FREE FROM DEFECTS IN MATERIALS AND
WORKMANSHIP IN NORMAL USE AND SERVICE AS DESCRIBED ON THE FACE HEREOF.
Warranty Obligations of HYDRO SYSTEMS, INC.:
Should a defect in workmanship and/or material in any item cover by this warranty become evident during
the term of the warranty, then upon the consumer following the procedures set forth below, HYDRO
SYSTEMS, INC. at its opinion, will repair or replace such item at its own cost and expense. HYDRO
SYSTEMS, INC. is not, however, responsible under this warranty for any cost of shipping or transportation
or the equipment or parts thereof to or from the Service Department. Also, HYDRO SYSTEMS, INC. is not
liable for any loss of time, inconvenience, incidental expenses such as telephone calls, labor or material
charges incurred in connection with the removal or the replacement of the equipment, or any other incidental
or consequential damages, unless otherwise prohibited by applicable State law.
Procedures to be followed to obtain warranty service:
1. Upon discovery of any defect or malfunction, notify the supplier/installer and HYDRO SYSTEMS,
INC. Service Department, 29132 Avenue Paine, Valencia, Ca. 91355 Telephone: [phone],
within (15) fifteen days and include a description of the malfunction or defect, the Hydro Systems
distributors name and purchase order number or the 5 digit bathtub serial number. The bathtub
serial number can be found on the warranty card or on the model card located on the underside of
the bathtub.
2. Upon inspection, HYDRO SYSTEMS, INC. at its option will repair or replace any defective or
malfunctioning part of its system or bathtub. If repairs cannot be made on site, HYDRO SYSTEMS,
INC. at its opinion will repair or replace at the factory. However, the cost of removal or installation of
a replacement system and cost of transportation to and from HYDRO SYSTEMS, INC. are not
covered. All parts, labor and materials necessary to repair the system or bathtub are covered
except parts excluded below.
Exclusions – This warranty does not cover:
1. Any items manufactured by other companies and installed by HYDRO SYSTEMS, INC. such items
may carry warranties offered by the manufactures of the original items.
2. Problems resulting from failure to comply with installation instructions or drawings, or improper
installation.
3. Problems resulting from abuse, misuse, negligence or accident by any party other than HYDRO
SYSTEMS, INC. such as, but not limited to, damage to parts by installers.
4. Problems resulting in whole or part from alteration or modification of these products by any party.
5. Metal failures due to chemical corrosion.
This warranty is provided to you as part of your purchase order. It gives you specific legal rights you should
keep in a safe place along with your purchase order.
Free Standing Tubs Supplemental Installation Information
General Information
• Rough In Dimensions – For critical dimensions, we suggest taking the measurements of the actual
tub on site. All printed specifications are +/- ½ inch and subject to change without notice.
• Base –the tub must be level
Basic Installation Procedure
• Determine final location of the tub. Tub will sit on top of finished flooring.
• Ensure location is structurally sound, flat and level.
• Align the tub in a manner that the drain lines up with the P-trap in the floor. DO NOT LET THE TUB
REST ON THE DRAIN PLUMBING.