User's Manual

20
3.OO operation (continued)
3.O4 Power/Standby Button
There is one button and LED labeled Power, on the DMx.
This button can be pressed at any time to stop the DMx
from priming, running, or receiving detergent or rinse
signals from the dish machine. This button is especially
useful when performing maintenance, such as changing
squeeze tubes or deliming the detergent tank.
Please note that pressing the Power button does not isolate the dispenser from line voltage and therefore, precautions
still must be taken to avoid shock when working inside the cabinet.
LED Color Fixed or Flashing Buzzer Indication
Green Fixed
Off The dispenser is operating normally, meaning it is ready to receive detergent or rinse signals to begin dosing.
Red Fixed
Off
This indicates that the dispenser is currently in Standby mode and will not dose product when detergent or
rinse signals are activated. Additionally, the prime feature will not operate.
Flashing
Off
The Power/Standby LED flashing red once per second indicates that the dispenser's hardware (e.g. real-time
clock, flash memory, or pump configuration) is malfunctioning. Please refer the Troubleshooting Section 8.00
on page 55 for more information.
Orange Flashing
Off
1) Maintenance Alarm - Dispenser has switched from Probe to Probeless Mode due to a faulty probe.
(Probeless Autoswitch)
2) After clearing a critical alarm.
Blue Fixed
Off
This indicates that the dispenser is connected to a mobile device via Bluetooth and the Hydro Connect
Mobile Application.
Power/Standby Button
DETERGENT RINSE AID SANITIZER POWER