User's Manual

39
5.OO setup (continued)
5.O4 SETUP FROM FILE (continued)
Creating a New Setup File
To create and save a new setup file to the Hydro Connect
Cloud for wider use, navigate to the Guided Setup section
outlined in section 5.03 and configure the unit as desired.
When the configuration of the controller is as desired for the
new Setup File, go to Setup From File and select Create File,
as shown to the right.
In the Create File window name the file with a unique identifier
and press Save.
Viewing Company Setup File Library
The library of Setup Files for a given company can be viewed and managed in the Hydro Connect Cloud by logging into
Hydro Connect, navigating to the Admin Section and selecting Company.
When the Company sub-section is selected, a grid of
“company cards” will be displayed automatically, for all the
companies that the user can view or edit, as shown.
If multiple company cards are shown, a search bar and filter
(country, city, state, zip code) can be used to narrow down
those listed and speed up the selection process.
To access the library of configuration files, click the “three
dots” in the upper-right corner of any company card and then
select Configuration Library to view all the setup files that
exist in the library for that company.
Use
Guided
Setup as
needed
Then
press
Setup
From File
Enter a
name for
the new
Setup File,
then press
Save
Press
Create File
Click
Company
Viewing Company Setup File Library
The library of Setup Files for a given company can be viewed and managed in the Hydro Connect Cloud by logging into
Hydro Connect, navigating to the Admin Section and selecting Company.
Click the “three dots” at the upper-right corner of any
company card, then select Configuration Library.
Use the Filter options to reduce the
number of "Company Cards" displayed.