User's Manual

46
5.OO setup (continued)
5.O6 ADVANCED SETUP (continued)
Clear Memory
The DMx is designed to store approximately 6 months of
activity data to reduce unnecessary site visits just to retrieve
data.
If this memory capacity is exceeded on the DMx, the oldest
records will be overwritten, to make room for the new data.
Alternatively, the user can clear the memory on the dispenser
by pressing the Clear Memory button and then pressing
Accept.
Download Detailed
Data from the DMx dispenser is automatically transmitted to
Hydro Connect each time that the app connects/disconnects
using the mobile device’s cellular or Wi-Fi service.
But, If the mobile device does not have a cellular or Wi-Fi
connection, either the Diagnostic Data or the Rack Data (last 1
month, last 3 months, or all) can also be manually transmitted
using the Download Detailed feature.
Asset Management
For purposes of reporting to Hydro Connect, it is critical
that the DMx dispenser gets linked to a valid site that is set
up within Hydro Connect. This will allow the data to stream
to Hydro Connect but will also provide valuable information
regarding where the dispenser is physically located and when
it was installed.
To make this link, press the Asset Management button to
produce a list of all the valid sites that are setup within the
user’s Chemical Company hierarchy in Hydro Connect. Search
using the search bar for the site in which the DMx is being
installed and press Apply.
Asset Management
Button
Asset Management
Site List
Factory Reset
Confirmation
Clear Memory
Button