User's Manual

6
1.OO overview
1.O1 Package Contents
DMx Warewash Dispenser
(P/N varies by model, see table on page 7)
Product Options:
• Rinse Temperature Sensor Kit
• Temperature Compensated Conductivity Probe Kit
• Inductive Probe Kit (Temperature Compensated)
• Pump tubing Kit (Chemical pick-up tubing, with stiffeners)
Mounting Kit (HYD13-06647-00)
(Mounting Bracket, Wall Anchors and Screws)
Accessory Kit:
2-Product (HYD90099996) Detergent and Rinse Injection Fittings. and Basic Conductivity Probe
3-Product (HYD90099997) Detergent, Rinse and Sanitizer Injection Fittings. and Basic Conductivity Probe
1.O3 Product Features
• The DMx is versatile to work anywhere in the world on most high or low temperature door, conveyor, and flight-style
machines. The unit has multiple pump and sensor options and can support solid chemical formulations as well as liquids
• Save installation time with intuitive configuration using the Hydro Connect Mobile Application
• Reduce install labor with pre-wired power, signal, and conductivity cabling
• The most reliable motor-driven warewash dispenser on the market
• Improve kitchen performance with detailed reporting on productivity (racks), chemical usage, cost, and alarms through
Hydro Connect (option of manual or real-time data transfers)
• Prevent challenges associated with conductivity probe scaling using the optional inductive probe
• Ensure each rack meets food safety standards with optional tank temperature, rinse temperature, and chemical depletion
sensors
1.O2 Description
The DMx is a versatile, scalable warewash dispenser, designed to accurately and reliably dispense solid or liquid detergents,
rinse aid or sanitizer in commercial kitchens. It functions with most styles of dish machines and is available with numerous
optional upgrades to enhance its functionality. The DMx is compatible with Hydro Connect (Hydro’s IoT platform) and features
intuitive configuration and comprehensive reporting through the Hydro Connect Mobile Application.
For an electronic copy of this document go to www.hydrosystemsco.com.
DMx 2-Product & 3-Product
Warewash Dispensers
Safety Precautions
WARNING: Please read precautions thoroughly before operation. Meet all applicable local codes and regulations.
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS
Please use this equipment carefully and observe all warnings and cautions.
WEAR
protective clothing and eyewear when dispensing chemicals or other materials or when working in the
vicinity of all chemicals, filling or emptying equipment, or performing maintenance.
ALWAYS
observe safety and handling instructions of the chemical manufacturer.
direct discharge away from you or other persons or into approved containers.
dispense cleaners and chemicals in accordance with manufacturer’s instructions. Exercise CAUTION when
maintaining your equipment.
reassemble equipment according to instruction procedures. Be sure all components are firmly screwed or
latched into position.
KEEP
equipment clean to maintain proper operation.
ATTACH
only to water tap outlets (25 PSI Minimum, 85 PSI Maximum and Maximum water temperature 120° F).
NOTE
if the unit is used to fill a sink, or the discharge hose can be placed into a sink, the unit must mounted be so
the bottom of the cabinet is above the overflow rim of the sink.
if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
DETERGENT RINSE AID POWER
DETERGENT RINSE AID SANITIZER POWERPOWER