Dimensions Guide

SYDNEY 6034
DESIGNER COLLECTION
aCrylIC tub
• *Tub must be set in mortar base*
• Acrylic models nished in 1/8” thick layer of deep lustrous acrylic
• Pre-wired pump on pump platform (standard pump location only)
• Integral E-Z level platform facilitates installation
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
All specications and options subject to change without notice please
contact a Hydro Systems representative for more information.
Certain options or altering the pump/blower location may cause
the pump/blower to extend beyond the tub decking. For cutout
dimensions wait for unit to arrive. All specications subject to change
without notice.
CODES AND COMPLIANCES
Massachusetts code File no: P1-0614-491
Page 2 of 2
aS ShOwn:
Whirlpool option (top)
LH Tile Flange and Skirt (bottom)
FeatureS ShOwn:
• Overflow location
• Standard jet location
alSO aVa I l a b l e :
• Soaking tub only
• Thermal Air
• Combo
SIze:
60.34.20
baCkSlOPe:
28 degrees
water CaPaCIty:
66 Gallons
weIght:
95 - 135 pounds depending on system
3-wall InStall dImenSIOnS:
• (L)ength - 60”
• (W)idth - 34”
• Top of Ledger - 20-3/4”
InStallatIOn tIPS:
• When adding integral linear drain
p-trap location is now below waste
• Adding multiple systems/options
may require equipment to stick
out from tub deck or be installed
remotely
HYDRO SYSTEMS, INC.
29132 Avenue Paine, Valencia, CA 91355
661.775.0686, fax [phone], www.hydrosystem.com
Note: The information contained on
this drawing is the sole property of
Hydro Systems, Inc. Any
reproduction in part or as a whole
without the written permission of
Hydro Systems, Inc. is prohibited.
Title:
Date:
Scale:
SYDNEY 6034
July 9, 2018
None
Rev:
Date:
Material: Acrylic and Fiberglass, ¼" nominal thickness
Pump/
Blower
60
17
3
4
9
40
21
22
2.75
17.5
28°
34
19.75
17
21
Pump/ Blower
1
V-1
Optional Equipment Dimensions
• Whirlpool Pump: 12"(H) x 16"(L)
• Thermal Air Blower: 5"(H) x 11"(L)
• Hydro Fusion: 7"(H) x 15.5"(L)
• Hydro Indulge: 11"(H) x 19"(L)