Owner's manual

Operating Instructions

Whenever the valve is in Service the current time of day can be set, the control programmed, or an extra

regeneration initiated at any time.

Flow Indicator:

Flashing Dot with Water Flow

P.M. Indicator

Service Indicator:

Valve In Service - Dot On

Extra Cycle Tonight - Flashing Dot

Push either the Up or Down Set Button once to adjust Time of Day Display by one digit.

Push and hold either Up or Down Set Button to adjust Time of Day Display by several digits.

1. Push and hold for 5 seconds both the Up and Down Set Buttons to enter Programming Mode.

2. Push the Extra Cycle Button once per display until all have been viewed and this mode is exited and

normal operation is resumed.

Set Up Button

Program Mode Indicator:

Program Mode Entered - Dot On

Extra Cycle Button

Set Down Button