Manual

Mounting Electrical Control Box

The electrical control box can be mounted on the wall (Option A) or on the

disinfection chamber (Option B), according to the following instructions.

Option A: Wall

mount

Follow these steps to mount the electrical control box on the wall.

Step Action

1 Attach the optional wall mount bracket to the wall using suitable hardware for your wall

surface.

2 Position the keyhole slots on the back of the electrical control box over the tabs on the

wall mount bracket and slide into place.

Option B:

Chamber

mount

Follow these steps to mount the electrical control box on the disinfection chamber.

Step Action Diagram

Feed the electrical control box straps through the

upper and lower recessed areas on the back of the

electrical control box.

2 Position the electrical control box on the UV

disinfection chamber: Wrap the electrical box straps

around the chamber, push loose end through high

side of Q-Clip, and pull through to tighten.

Keyhole Slots

IMPORTANT!

If it is necessary to remove the electrical control box strap, lift the pawl to

release the Q-Clip. You may need to use a screwdriver to lift the pawl.

PAWL