Manual

Installing the UV Lamp, Continued
Position Glo-
Cap
The Glo-Cap must be properly placed on the headpiece for the UV
disinfection unit to work. Follow the steps below to position the Glo-Cap.
Step Action
1 Align the tab on the Glo-Cap with the middle tab on the transparent clip.
2 Lower the Glo-Cap onto the headpiece until it clicks into place. If it does not
click into place, make sure that the tabs on the Glo-Cap are not over the raised
tabs on the headpiece. If they are, turn the Glo-Cap. When properly installed, the
Glo-Cap will not separate from the headpiece.
HEADPIECE TAB
GLO-CAP
A
LIGNMENT TAB
MIDDLE
TAB
TAB
11