Phau Ntawv Qhia

WSV6 VERTICAL SERIES - IOM
WSV6 Vertical Series – IOM 17
INSTALLATION CONTINUED
UNIT CLEARANCE REQUIREMENTS
FIGURE 7 – Unit Clearance Requirements
MOUNTING DETAILS
Locate the unit in an area that provides minimum clearance accesses as specified by
FIGURE 7 – Unit Clearance Requirements.
Also, refer to this figure for detailed information on unit dimensional sizes. Consider all additional clearances needed for water
connections, electrical connections, duct connections and sufficient return airflow.
UNITS ARE ONLY INTENDED FOR INDOOR INSTALLATION
DO NOT locate unit in areas subject to freezing temperatures or where high humidity levels could cause cabinet condensation.
WSV6 units are available in right- and left-hand configurations. Units should be mounted level with a proper drain pan pitch
toward the condensate drain as seen in
FIGURE 8 – Mounting Installation. 3/8”-1/2” vibration isolation pads must be used to
minimize vibration transmission.

It is important to ensure the unit is securely mounted and that the mounting structure is sufficient to support the operating
weight of the equipment. Place and size all anchors to ensure a safe and durable installation.