Phau Ntawv Qhia
WSV6 VERTICAL SERIES - IOM
4 WSV6 Vertical Series – IOM
SAFETY CONSIDERATIONS
1. READ THE ENTIRE MANUAL BEFORE STARTING THE INSTALLATION.
2. These instructions are intended as a general guide and do not supersede national, state, or local codes in any way.
3. Altering the product, improper installation, or the use of unauthorized factory parts voids all warranty or implied warranty
and may result in adverse operation and/or performance or may result in hazardous conditions to service personnel and
occupants. Company employees or contractors are not authorized to waive this warning.
4. This product should only be installed and serviced by a qualified, licensed, and factory authorized installer or service agency.
5. All “kits” and “accessories” used must be factory authorized when modifying this product. Refer and follow instructions
packaged with the kits or accessories when installing.
RECOGNIZE THE FOLLOWING SAFETY NOTATIONS THROUGHOUT THIS MANUAL
AND POSTED ON THE EQUIPMENT:
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation or unsafe practices
that could result in severe personal injury or death and/or
damage to property.
This warning signifies potential electrical shock hazards that
could result in personal injury or death.
The CAUTION symbol indicates a potentially hazardous situation
that may result in minor or moderate injury.
Suggests important procedure steps to insure proper
installation, reliability, or operation.
Used to highlight suggestions, which may result in enhanced
installation, reliability or operation.
Failure to follow safety warnings exactly could result in
dangerous operation, serious injury, death or property
damage.
Improper servicing could result in dangerous operation, serious
injury, death or property damage.
Before servicing, disconnect all electrical power to the
WSV6 water source heat pump.
When servicing controls, label all wires prior to
disconnecting. Reconnect wires correctly.
Verify proper operation after servicing.