Phau Ntawv Qhia
WSV6 VERTICAL SERIES - IOM
8 WSV6 Vertical Series – IOM
STORAGE
Equipment should be stored in a clean dry, conditioned
area with maximum temperatures up to 120°F [48.89°C]
and minimum temperatures to 32°F [0°C]. Units should be
stored upright and in an indoor environment. It is
recommended to leave packaging on the unit until the
installation is to begin.
Store cabinets how they are shipped (vertical), keeping
them crated and on their pallets for protection. Failure to
follow these instructions may result in improper
installation, adjustment, service or maintenance, property
damage, personal injury or death.
DO NOT operate these units during the construction
process. Mechanical components and filters could become
clogged with dirt and debris, which can cause damage to the
system.
The manufacturer does not warrant equipment subjected
to abuse.
Stacking of the WSV6 Systems is strictly prohibited. Stacking
units may result in system and/or property damage
SHIPPING & PACKAGE LIST
Material in this shipment has been inspected at the factory
and released to the transportation agency in good
condition. When received, a visual inspection of all cartons
should be made immediately. Any evidence of rough
handling or apparent damage should be noted on the
delivery receipt in the presence of the carrier’s
representative. If damage is found, a claim should be
immediately filed against the carrier.
SHIPPING INSTRUCTIONS
WSV6 units must remain in the upright position as seen in
FIGURE 2 – Standard Packaging throughout the shipping and
handling process to maintain a proper level of oil in the
compressor.
Shrink-wrap is located around the unit for protection.
Remove before installation.
FIGURE 2 – Standard Packaging
PACKAGE LIST
The units will be shipped with the following items:
1- WSV6 unit:
A- Shipping brackets
a. Screws
2- Literature package
A- IOM - Installation & Operations Manual
Check the unit for shipping damage; if found, immediately
contact the last carrier.










