Owner manual

Optional Winch Installation

T:\Hyline Offroad, LLC\Installation Instructions\JK-20OTM\JK-20OTM Installation Instructions.doc Page 1 of 2

REV 1 12/4/2009

Proudly Made In USA

Installation Instructions:

JK Oversized Tire Mount

Part Number: JK-20OTM

Vehicle Fitment:

Fits onto Jeep Wrangler 07-

Present

Parts List

Qty:

1 JK Oversize Tire Mount

1 Third Brake Light Plate

3 ½”-20 Nuts

3 ½” Flat Washers

Tools Needed

Congratulations on your purchase of the Hyline Offroad JK Oversized Tire Mount. All of our products are

completely manufactured in our facility located in Perkasie, PA. They are designed and engineered by Offroad

enthusiasts just like you to be rock solid at an affordable price. Hyline Offroad would like to thank you for your

recent purchase and look forward to serving you in the future.

Hyline Offroad Staff

Lug Nut Wrench

3/4” Deep Socket

PAGE 1
Proudly Made In USA Installation Instructions: JK Oversized Tire Mount Part Number: JK-20OTM Parts List Qty: 1 1 3 3 JK Oversize Tire Mount Third Brake Light Plate ½”-20 Nuts ½” Flat Washers Vehicle Fitment: Fits onto Jeep Wrangler 07Present Tools Needed Lug Nut Wrench 3/4” Deep Socket Congratulations on your purchase of the Hyline Offroad JK Oversized Tire Mount. All of our products are completely manufactured in our facility located in Perkasie, PA.
PAGE 2
PLEASE READ INSTRUCTIONS BEFORE BEGINNING INSTALLATION JK Oversized Tire Mount IMPORTANT: We do not recommend installing any tire larger than 35” in Diameter. Doing so may cause damage to your Jeep’s tailgate hinges. Step 1 – Using the Lug Wrench remove the stock tire from vehicle. You will NOT be removing the Stock Tire Carrier from the Jeep. Step 2 – If you’re installing a 2” Round LED Third Brake Light you can cut the existing brake light wire and splice following the light manufacturers instructions.