Knape & Vogt insists on the Call Knape & Vogt at: 1-800-253-1561
MISSING A PART? There is no need to return this item to the store. Instead call our TOLL FREE HOTLINE. 1.800.253.1561 We appreciate your purchase of the HyLoft storage system. Knape & Vogt has made every effort to supply a quality product that insures a lifetime of trouble-free service. In the event that you have any type of problems and BEFORE RETURNING THE UNIT TO THE SELLER, please call our toll free number 1.800.253.1561.
Preparation and Safety Information IMPORTANT-READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION Safety: Read and understand the warning on your stepladder and make sure the ladder is in good working order. Examine all tools needed to insure they are in proper working order before starting. Power tools that are not internally grounded require power cords and extension cords with a ground prong. Always wear eye protection when drilling or installing parts.
ASSEMBLY INSTRUCTIONS SuperPro 48" X 48" Ceiling Mounted Shelf Item # 00180 white Item # 00183 hammertone Joists 24" to 42" apart M Parts Included: IMPORTANT-Read through entire instructions before beginning any installation.
IMPORTANT-READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION Locate the ceiling joists in the area of desired installation and determine the direction in which they are running. The ceiling Angle Brackets(B) are installed parallel to the ceiling joists. Refer to the diagram below for additional installation clarification. IMPORTANT:Do not over tighten the lag screws (max 10 ft. lbs). They only need to be snug down, no more. Do not use an impact driver.
ATTACH SUPPORT FRAMES M M Place two 48" Support Frames(F) on top of feet and using Clamps(K) with thick part up, fasten to downrod using Hex Bolts(L) and Nuts(J). Make sure ends of Support Frames(F) are even and square. Place 48" Support Frames(G) on top of 48" Support Frames (F) and loosely bolt together in each corner using ¼" Hex Bolts(M) and Nuts(N) using a 7/16" wrench or nut driver. Do not tighten until after placing grids.
SuperPro 48" X 48" Ceiling Mounted Shelf Item # 00180 white Item # 00183 hammertone ALTERNATE INSTALLATIONS Multi-Directional Joists: If joists change direction, 2 or all 4 Downrods (C&E) can be installed on the other 48" side. Rotate direction of Angle Brackets (B) and Downrods (C&E) & install as shown in steps 1-3 of original instructions.
IMPORTANTE Knape & Vogt demanda los más altos estándares de calidad en la elaboración de sus productos. Se inspecciona detalladamente cada pieza antes del envío. En caso de que surja algún problema, NO DEVUELVA EL ARTÍCULO A LA TIENDA. Comuníquese con Knape & Vogt al: 1-800-253-1561 para obtener ayuda con cualquier problema o pregunta que pueda tener. Gracias.
¿LE FALTA ALGUNA PIEZA? No es necesario regresar este artículo a la tienda. Llámenos a nuestro número gratuito: 1.800.253.1561 Apreciamos su compra de su nuevo estante HyLoft. Knape & Vogt ha hecho todo esfuerzo para ofrecerle un producto de calidad que le asegure un servicio de por vida, libre de problemas. En caso de cualquier tipo de problema, y ANTES DE DEVOLVER LA UNIDAD AL VENDEDOR sírvase llamar a nuestro teléfono libre de cargo 1.800.253.1561.
Preparación e información sobre seguridad IMPORTANTE: LEA ATENTAMENTE LAS INSTRUCCIONES ANTES DE COMENZAR CON LA INSTALACIÓN Seguridad: Lea y asegúrese de comprender la advertencia que se encuentra en su escalera de mano y cerciórese de que esté en buenas condiciones de funcionamiento. Examine todas las herramientas necesarias para verificar que están en buenas condiciones de funcionamiento, antes de comenzar.
INSTRUCCIONES DE INSTALACIÓN Estantería montada al techo SuperPro 48" x 48" (122 cm x 122 cm) Artículo Nro. 00180 blanco Artículo Nro. 00183 aluminio martillado Cabrios con una separación de 61 a 106,5 cm (24" a 42") M Piezas incluidas: IMPORTANTE: Lea todas las instrucciones antes de comenzar con la instalación.
IMPORTANTE: LEA ATENTAMENTE LAS INSTRUCCIONES ANTES DE COMENZAR CON LA INSTALACIÓN Ubique los cabrios del techo en el área donde desea instalar la unidad y determine en que dirección están orientados. Los ángulos de fijación (B) deberán instalarse paralelos a los cabrios del techo. Consulte el diagrama a continuación para mayor IMPORTANTE: No ajuste demasiado los tornillos para madera (máx. 10 pies por libra). Sólo es necesario atornillarlos al nivel de la superficie, no más.
FIJE LOS MARCOS DE APOYO M M Coloque dos marcos de apoyo de 122 cm (48") (F) en la parte superior de los pies y utilizando las Abrazaderas (K) con la parte gruesa hacia arriba, ajuste la varilla descendente con los pernos hexagonales (L) y tuercas (J). Asegúrese que los extremos de los marcos de apoyo (F) estén rectos y en escuadra.
Estantería montada al techo SuperPro 48" x 48" (122 cm x 122 cm) Artículo Nro. 00180 blanco Artículo Nro. 00183 aluminio martillado INSTALACIONES ALTERNATIVAS Cabrios multidireccionales: Si se cambia la dirección de los cabrios, es posible instalar 2 o las 4 varillas descendentes (C y E) en el otro lateral de 122 cm (48"). Gire la dirección de los ángulos de fijación (B) y varillas descendentes (C y E) e proceda como se indica en los pasos 1 a 3 de las instrucciones originales.